Table 34. Removal steps of Wireless LAN antenna assembly, wireless WAN antenna assembly, and LCD rear cover
assembly (continued)
Cable routing: When you install the antenna assembly, route the cables as shown in the following figure. As you route
the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by
the cable guides, or a wire to be broken.
a
: Wireless LAN AUX antenna (black)
b
: Wireless WAN AUX antenna (blue)
c
: Wireless WAN MAIN antenna (orange)
d
: Wireless LAN MAIN antenna (gray)
Note: Some models might have a third white cable for wireless LAN.
80
Hardware Maintenance Manual