Table of Contents
Advertisement
Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several
kinds.
When you replace the base cover, apply the following labels:
1
FCC label
4
Serial number label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
2
GEO label
3
Rating label (COA)
5
Windows license label (COA)
6
Wireless WAN MAC label
7
Wireless LAN MAC label
8
Ethernet label
For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply
both to the new base cover.
For the location of each label, refer to the following figure:
1180 LCD unit
For access, remove these FRUs in order:
•
"1020 Hard disk drive or solid state drive assembly" on page 54
•
"1030 Keyboard" on page 55
•
"1040 Top case assembly" on page 58
•
"1090 Battery pack" on page 62
.
Chapter 8
Removing and replacing a FRU
73
Advertisement
Table of Contents
