Table 20. Removal steps of optical drive or travel cover (continued)
1
M2 × 4 mm, wafer-head, nylon-coated (2)
1110 DIMM
For access, remove "1030 Keyboard" on page 55.
Table 21. Removal steps of DIMM
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM in firmly, and pivot it until it
snaps into place. Make sure that it is firmly fixed in the slot and does not move easily.
For access, remove these FRUs in order:
•
"1020 Hard disk drive or solid state drive assembly" on page 54
•
"1030 Keyboard" on page 55
•
"1120 PCI Express Mini Card for wireless LAN" on page 65
•
"1130 PCI Express Mini Card for wireless WAN" on page 67
•
"1040 Top case assembly" on page 58
•
"1090 Battery pack" on page 62
64
Hardware Maintenance Manual
Black
0.181 Nm
(1.85 kgfcm)