1.SETTING UP WIRELESS NETWORK
Select the transmit power and press the [NEXT].
3
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
4
Confirm the settings and press the [FINISH].
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
5
The wireless settings apply after restarting the equipment.
1 SETTING UP WIRELESS NETWORK
Setting up the Ad Hoc Mode
41