Setting Up The Infrastructure Mode; Select Network Type - Kyocera TASKalfa 650c Operator's Manual

Setting Up the Infrastructure Mode

The wireless settings can be operated from the Control Panel of this equipment.
When setting up the equipment for the wireless network in the Infrastructure Mode, follow the steps below.
1. Select the network type
P.13 "Select network type"
2. Specify the SSID
P.16 "Specify SSID"
3. Select the security mode
P.19 "Select security mode"

Select network type

First access the WIRELESS SETTING screen from the ADMIN menu from the Touch Panel Display to select the network
type for the wireless network.
If you are not sure what network type to select, see the following section to determine the network type first.
P.10 "Determine the network type"
Selecting the network type
Press the [USER FUNCTIONS] button on the control panel to enter the User Functions
1
menu.
2 Press the [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
Press the [PASSWORD].
3
The input screen is displayed.
4 Enter the administrator password and press the [OK].
The ADMIN menu is displayed.
1 SETTING UP WIRELESS NETWORK

Setting Up the Infrastructure Mode

13