Kyocera TASKalfa 650c Operator's Manual page 35

1.SETTING UP WIRELESS NETWORK
Selecting no security mode
You can also set no security for wireless access.
If you do not set no security, anyone how knows the SSID can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
Press the [NONE] and press the [NEXT].
1
The TRANSMIT POWER and RATE SETTING screen is displayed.
Specify the following items and press the [NEXT].
2
TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
1 SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 33