Kyocera TASKalfa 650c Operator's Manual page 30

Gn-1050 operator's manual for the wireless lan module

Hide thumbs Also See for TASKalfa 650c:

Table of Contents

1 SETTING UP WIRELESS NETWORK

Specify the following items and press the [NEXT].

TRANSMIT POWER

Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not

have to limit the area, select [100%].

TRANSMIT RATE

Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select

[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.

Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.

Confirm the settings and press the [FINISH].

The shutdown screen is displayed.

If you want to change the settings, press the [PREV] to move back to the screen that you want to change and

then repeat the operation.

Press the [YES] to shutdown the equipment.

The wireless settings apply after restarting the equipment.

Setting Up the Infrastructure Mode

Table of Contents

Taskalfa 750c Taskalfa 550c Gn-1050