Basic Menu For The Copier Function - Kyocera TASKalfa 650c Copying Manual

1 BEFORE USING EQUIPMENT

BASIC menu for the copier function

When a few seconds have passed after you have turned the power ON, the BASIC menu for the copier function appears
on the touch panel. The BASIC menu shows the following information:
1
2
3
4
1. Message indication area
This shows a brief description of the functions or the current status of this equipment in message form.
2. Equipment status indication area (
This shows the size, paper type or amount of paper remaining in each drawer.
3. Index tabs (BASIC, EDIT, IMAGE) (
These are for switching the menus of "BASIC", "EDIT" and "IMAGE".
4. Alert message indication area
This shows alert messages such as the replacement timing of the toner cartridges or the waste toner box.
When this equipment is managed with the user management function and department management function
When this equipment is managed with the user management function and the department management function, the number of
copies available for each user or department appears here for approx. 5 seconds after user authentication.
The displayed number of copies available is the smaller one of either user (
The number of color copies available will not appear if a user who does not have the color copy privilege has logged in.
The display may differ depending on the management status of this equipment.
For the details of the user management function or the department management function, ask your administrator.
5. [APS] (automatic paper selection) button (
This is for changing the mode to automatic paper selection.
6. [ZOOM] button (
This is for changing the reproduction ratio of images.
7. [2-SIDED] button (
This is for selecting simplex/duplex copying (e.g. 1 -> 2-sided, 2 -> 2 sided).
8. [FINISHING] button (
This is for selecting a sorting mode.
8

BASIC menu for the copier function

5 6
P.10)
P.95, P.145)
P.55)
P.63)
P.84)
P.72)
20 19 18
7 8 9 10
) or department (
17
16
15
14
13
12
11
).