Advertisement
Connections
you'll need to make.
Recording
(Editing)
Combination
VCR
Playing (Source)
VCR
(_Audio Out (L)
oooo_oDoo¢
_ _
_.Audio Out (R)_
!-
./ideo Out_
_,_
J
/(AudX'io In (L)_
1
Insert a pre-recorded
tape
into the Playing (source) VCR.
Then, Insert a blank tape
with record tab into the Recording
(editing) Combination VCR.
Caution:
Unauthorized exchanging and/or copying
of copyrighted recordings may be
copyright infringement.
2
Select "LINE"
as the input on the Recording Combination VCR.
, If youare usingthis Combination VCR as the
Recordingunit,see "Selecting the Input Mode"
sectionon page 15.
Helpful
Note
• By using the PAUSE button (on the remote
control of the Recordingunit) whilecopying is in
progress, you can edit out unwanted parts of the
original recording.
3
Press PLAY
on the playing VCR.
Then, press PAUSE
when the tape reaches the point you want to
start copying.
4
Press REC and PLAY
time on the recordingCombination VCR.
Then, press PAUSE on
the remote
immediately.
5
Press PAUSE
on both units (at the same time), to begin copying.
Then, press STOP
on both units to stop c0Dying.
19
Advertisement
