Setting The Remote Code - Panasonic KX-TG2583S Operating Instructions Manual

Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00-99).
The factory preset remote code is "11". If you do not program your own
remote code, you can use "11".
Use the handset near the base unit. Make sure the unit is in the
standby mode initially.
1
2
3
4
5
6
Press { FUNCTION/EXIT/CHJ.
Press (_ or [_ repeatedly until the arrow I, Program
points to "Program".
¥ A • :Yes
Press FWD/EDIT {_ (Yes key).
Press _ or (_ repeatedly until the arrow
points to "TAD program".
Press FWD/EDIT {_ (Yes key).
,,The base unit display shows programming
options.
Press _.
,,The current remote code is displayed on the
base unit.
• Save DIRECT#
Set Sash Lime
[,A •:Ye
switching
Talkprogra m
I•TAD
[WA •:Yes
Answering
system setting.
[See base unit.
Base unit display
Remote code
:i]
Enter a remote code using a 2-digit
number (00-99).
Press FWD/EDIT (_ (Save key).
• A beep sounds.
,,To return to the standby mode, press {FUNCTIONIEXITICH].
,.,If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
,,The current remote code is displayed on the base unit. When finished, press
[FUNCTION/EXIT/OHm.
6/