Editing An Item In The Directory - Panasonic KX-TG2583S Operating Instructions Manual

Using the Directory
Editing an Item in the Directory
Programming must be carried out with the handset.
Make sure the unit is in the standby mode initially.
Press BACK (_ or FWD/EDIT [_ to enter
the directory list.
t'_ Press [_ or [_.
f-,.
*The first item is displayed.
Directory list
IYA
_=Caller s list
3
4
5
6
Press [_ or (_ repeatedly to find the
directory item you want to change, and
press FWD/EDIT j_.
*To search for the item by initial, see page 47.
*If you do not need to change the name, go to
step 5.
Edit the name using the dialing buttons,
BACK _ or FWD/EDIT _ (p. 45), up to 15
characters.
Press [_ (_exL key).
°If you do not need to change the number, go to
step 7.
Add a number to the current number.
• Pressing [INTERCOM/CLEAFI) erases the digit
to the left of the cursor. To erase all digits,
press and hold [INTERCOM/CLEAR].
Jane
1234567
Enter name
Jane
4_ Y:Next
Enter name
Jane Walker
4_ ¥:Next
1234567
4_ T=Next
0981234567
4_ ¥:Next
ane Walker
981234567
=Edit _=Save
I Jane Walker
981234567
7
Press [_ (Ne×L key).
°If you want to change the storing name or
number, press (_ (Sd±L key) repeatedly to
reach the desired display and change it.
Press FWD/EDIT _ (Save key).
*A beep sounds.
,,To continue editing other items, repeat from
step 3.
,,,To return to the standby mode, press
(FUNCTION/EXlT/CH].
*You can exit the programmmg mode any time by pressing [FUNCTIONIEXITICHJ
5O