Setting Date And Time - Panasonic HDC-TM700P Operating Instructions Manual

Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
4_ Change the mode to _ or O.
• The date and time function is driven by a
]
1
Select the menu.
: [SETUP] _ [CLOCK SET]
2
Touch the date or time to be
set, then set the desired value
using [_/[_.
built-in lithium battery.
• When this unit is purchased, the clock is
set. If the time display becomes [- -], the
built-in lithium battery needs to be
charged. To recharge the built-in lithium
battery, connect the AC adaptor or attach
the battery to this unit. Leave the unit as it
is for approx. 24 hours and the battery will
maintain the date and time for approx.
6 months. (The battery is still being
recharged even if the power is off.)
O Displaying the World time setting
(-) 46):
[HOME]/_#' [DESTINATION]
• The year can be set between 2000 and 2039.
• The 12-hour system is used to display the time.
3 Touch [ENTER].
• The clock function starts at [00] seconds.
• A message prompting for World time setting
may be displayed. Perform the World time
setting by touching the screen. (-) 46)
• Touch [EXIT] or press the MENU button to
complete the setting.
32
VQT2M75