Panasonic HDC-TM700P Operating Instructions Manual page 60

Fade
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
• The Fade setting is canceled when the recording stops.
(Fade in)
• To select the color for Fade in/out
: [RECORD SETUP] _ [FADE COLOR]
[WHITE] or [BLACK]
(Fade out)
• The thumbnails of scenes recorded using fade in become black (or white).
Intelligent contrast control
This brightens parts that are in shadow and difficult to see and suppresses white saturation
in bright parts at the same time. Both bright and dark parts can be recorded clearly,
• If there are extremely dark or bright parts or the brightness is insufficient, the effect may not
be clear.
This allows recording of the pictures and sound to start approximately 3 seconds
before the recording start/stop button is pressed,
• PRE'REC_I appears on the screen.
• Aim the unit at the subject beforehand.
• There is no beep sound.
• PRE-REC is canceled in the following cases.
If you change the mode.
If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD]
If you press the MENU button or 1080/60p button.
If you turn the unit off.
If you start recording.
After 3 hours have passed
• After setting PRE-REC, if recording starts in less than 3 seconds, or while the PRE-REC
indication flashes within about 3 seconds after initiating the Quick start operation, motion
pictures taken 3 seconds before pressing the recording start/stop button cannot be
recorded.
• images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
6O
VQT2M75