CHAPTER 4 PRINTABLE AREAS
4.1 Printable Area – Stylus Photo 870
The division of the paper between printing area and non-printing area is controlled by the values
of A, B, C, D, E, G, and H, and by the dot unit (1 dot = 1/360 inch.). When printing near the top
and bottom margins in MicroWeave, printing beyond the regions G and H below which the
nozzles can project is not possibles.
Table 7 Printable area diagram.
Left margin non-printable area
Area nozzle can
project when
processing top
margin
Paper feed direction
EPSON Imaging Technology Center
Revision: 1
Printing area
A
Right margin non-printable area
B
P
C
Top margin non-printable area
D
Printing area
E
F
Bottom margin
non-printable area
Page: 14
10/6/00