Printer Specifications; Printable Areas - Epson Color Proofer 5500 Specifications

EPSON Stylus Pro 5500

Printer Specifications

Printing
Printing method
Nozzle configuration
Resolution
Ink type
Print direction
Control code
Line spacing
Paper feed speed
Electrical
Specification 120V Model
Input voltage range 99 to 132V
Rated frequency range
Input frequency range
Rated current
Power consumption Approx. 26W (ISO/IEC 10561 Letter Pattern)
Paper
Size Paper types*
Letter Plain bond
(8.5 × 11 in.)
paper and
A3 (11.7 × 16.5 in.) special ink jet
A4 (8.3 × 11.7 in.)
papers
A5 (5.8 × 8.3 in.)
distributed by
A6 (4.1 × 5.8 in.)
EPSON**
Legal (8.5 × 14 in.)
Half Letter
(5.5 × 8.5 in.)
Executive
(7.5 × 10 in.)
Super A3/B
(13 × 19 in.)
US B (11 × 17 in.)
B4 (10.1 × 14.2 in.)
B5 (7.2 × 10.1 in.)
* Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, EPSON cannot attest to
the quality of any non-EPSON brand or type of paper. Always test
samples of paper stock before purchasing large quantities or
printing large jobs. Poor quality paper may reduce print quality and
cause paper jams and other problems. If you encounter problems,
switch to a higher grade of paper.
2 - EPSON Stylus Pro 5500
On-demand ink jet
96 nozzles × 6 (black, cyan, magenta,
yellow, light cyan, light magenta)
Maximum 2880 × 720 dpi
EPSON Archival ink (pigment
based)
Bidirectional with logic seeking
™
ESC/P Raster
1/6 inch (default), programmable in
1/720-inch increments
79 milliseconds per 1/6-inch line
152 mm per second in continuous
feeding
220−240V Model
198 to 264V
50 to 60 Hz
49.5 to 60.5 Hz
1.0A
10W or less in standby mode
Thickness Weight
Plain paper: Plain paper:
0.003 to 0.004 17 to 24 lb
inch (64 to 90 g/m
(0.08 to 0.11
mm)
** Special papers distributed by EPSON are usable only under these
conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH

Printable areas

Single sheets
A
BL
A: The minimum top margin is 0.12 inch (3 mm).
B: The minimum left and right margins are 0.12 inch (3 mm).
C: The minimum bottom margin is 0.55 inch (14 mm).
Note:
The maximum printable width is 12.7 inches (416 mm).
Ink Cartridges
Black
Specification (T486011)
Print capacity* 2500 pages
(A4, 720 dpi,
5% coverage)
Cartridge life
Storage
temperature
Transit
temperature
Freezing
temperature**
2 )
0.99 × 5.5 × 4.2
Dimensions
(W × D × H)
inches
25.1 × 139.6 ×
105.3 mm
Weight 7.05 oz (200 g)
(approximate)
* The print capacity may vary, depending on how often you run cleaning cycles.
** Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).
Caution:
To ensure good results, use genuine EPSON ink cartridges. Other
products may cause damage to your printer not covered by
EPSON's warranty.
Don't use an ink cartridge if the date on the package has expired.
2/01
BR
C
Magenta,
Cyan, light light
cyan magenta
(T489011) (T488011)
2400 pages
(A4, 720 dpi,
5% coverage each color)
2 years from production date
Installed: –4 to 104 °F (–20 to 40 °C),
1 month at 104 °F (40 °C)
Uninstalled: –22 to 104 °F (–30 to 40 °C),
1 month at 104 °F (40 °C)
–22 to 140 °F (–30 to 60 °C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
5 °F (–15 °C)
1.4 × 5.6 × 4.2 inches
35.1 × 140.9 × 105.3 mm
8.8 oz (250 g)
Yellow
(T487011)
2500 pages
(A4, 720 dpi,
5% coverage)
0.99 × 5.5 × 4.2
inches
25.1 × 139.6 ×
105.3 mm
7.05 oz (200 g)