Operation; Controls; Before First Use; Testing The Oven - Vulcan-Hart VCH16 ML-126367 Installation & Operation Manual

VCH & VRT SERIES OVENS

CONTROLS

POWER HOLDING
ON / OFF TEMPERATURE
SWITCH & KNOB - LIGHT
LIGHT
COOKING START
TIME BUTTON
KNOBS
All operating controls are located on the
front Control Panel(s).
supplied with individual
controls for each oven cavity.
Power On / Off Switch:
The power On/Off switch turns the oven
on.
Power On / Off Light:
Indicates that the Power On/Off switch
is ON.
Holding Temperature Knob:
Turn Holding Temperature knob to
desired holding temperature.
100⁰ F (38⁰ C) to 250⁰ F (121⁰ C)
Holding Temperature Light:
Indicates oven
Temperature mode.
Cooking Temperature Knob:
Turn knob to
temperature.
100⁰ F (38⁰ C) to 350⁰ F (177⁰ C)
Cooking Temperature Light:
Indicates oven is in Cooking Temp-
erature mode.

OPERATION

COOKING
TEMPERATURE
KNOB - LIGHT
THERMOMETER
The oven is
operating
is in Holding
desired roasting
Page 5
Cooking Time Knobs:
Cooking time knobs set the desired
cooking time.
Hours knob: 0 to 99
Minutes knob: 0 to 99
Seconds knob: 0 to 99
Start Button:
Start Button engages
thermostat after Cooking Timer has
been set.
Thermometer:
The thermometer indicates the interior
temperature of the oven.

BEFORE FIRST USE

1. Thoroughly clean the oven
before initial use. Please refer
to cleaning instructions in this
manual.
2. Test the oven to verify that the
oven operates normally.

TESTING THE OVEN

Before using the oven for the first time,
verify that the oven operates normally.
1. Check that the oven is connected
to the correct power source.
2. Set the COOKING TIME knob
to 0.
3. Turn the
ERATURE knob to 140⁰ F.
4. Set Power ON/OFF Switch to
ON position.
F-38055 (11-09)
the cooking
HOLDING TEMP-