Table of Contents
Advertisement
Installing the Paper Separator
Now assemble and install the paper separator as shown in
Figure E-4, inserting the separator into the slots on the back of
the printer. The separator keeps the paper that is coming out of
the printer from being pulled back in.
Figure E-4. Paper separator being assembled
When you
want
you can easily remove the tractor unit. Just push back the two
tractor release levers as shown in Figure E-5, tilt the unit up and
lift it off.
to use single-sheet paper in your SQ-2000,
installed
and
E - 3
Advertisement
Table of Contents
