Table of Contents
Advertisement
FF (Form Feed) button
This button is effective only when the SQ-2000 is in the off-
line state. When you press the FF button in the off-line state, the
paper is advanced to the next top of form.
LF (Line Feed) button
This button is effective only when the SQ-2000 is in the off-
line state. When you press this button in the off-line state, the
paper is advanced by a single line according to the current line
spacing value. If you hold down the switch, the paper continues
to advance.
Note:
To advance the paper a number of lines, use the FF and/or paper
feed knob. Pressing the LF switch continuously will shorten the
life of the motor.
CLEANING button
This button is effective only when the SQ-2000 is in the off-
line state. When you press the button at that time, the inside of
the print head is cleaned. Further details of cleaning are given in
Chapter 4.
SHEET FEED button
This button is effective only when the SQ-2000 is in the off-
line state. When you press the button in the off-line mode, the
paper bail opens and a single sheet of paper is loaded.
The first printed line is about one inch below the top edge of
the form.
25
Advertisement
Table of Contents
