Remedies For The Paper Jam Error - Epson SEIJ98006 Service Manual

EPSON Stylus Color 900

3.1.1.2 Remedies for the Paper Jam Error

This section includes the check points and corresponding actions which
are necessary when the Paper Jam Error constantly occurs when the
printer is turned on or feeding paper.
Be sure to follow the steps in the order described in the tables.
NOTE: If the finding for the question is Yes, take the action described in
the right column. If "No", proceed to the next step.
Troubleshooting
Table 3-6. Remedies for Paper Jam Error
Step Check Points
1 Is the paper length
beyond the
specifications?
2 Is the encoder located
at the back of the CR
covered with dust?
3 Is the encoder belt
nearly dislocated from
the encoder?
4 Is the PE sensor always
on because of the paper
debris or dust
accumulated over the
sensor.
Overview
Revision C
Actions
Instruct the user that the Paper Jam Error occurs
if paper whose length is beyond the specifications
is used.
Check if there is any dust or paper debris lodged
between the parts of the encoder (a transmission
type photo sensor) located at the back of the
carriage.
Referring to the illustration above, check if the
encoder belt is nearly dislocated from the
encoder.
Viewing the PE sensor from the front, check that
the actuator is the correct position: the actuator
falls in the cutout without any paper.
83