EPSON Stylus Color 900
4.2.6 C265 PSB/PSE Board Removal
1. Remove the printer mechanism. (See Section 4.2.2.)
2. Disconnect three connectors CN1, CN2, and CN3 from the C265
PSB/PSE board.
3. Remove three screws (including one for grounding) securing the
C265 PSB/PSE board to the lower case, then remove the C265
PSB/PSE board unit.
Screws securing the C265 PSB/PSE Board
CN1 - CN3
Figure 4-10. Removing the Connectors
Disassembly and Assembly
4. Remove two screws securing the shield plate on the C265 PSB/
PSE board, and remove the shield plate.
Screws securing the Shield Plate
5. Remove four screws
securing the C265 PSB/
PSE board to the bottom
frame, and remove the
C265 PSB/PSE board.
.
Disassembly Procedures
Figure 4-11. Removing the Shield Plate
Screws securing the
C265 PSB/PSE Board
Figure 4-12. C265 PSB/PSE Board Removal
Revision C
111