Selecting An Installation Method; Installing Utilities; Upgrading Driver Components; European Default Duplex - Kyocera TASKalfa 2550ci User Manual

Installation

Selecting an Installation Method

Installing Utilities

Upgrading Driver Components

1
2
3

European Default Duplex

1-2
You can select Express Mode for a network or USB connection and the
installation wizard will discover your printers. You can also select Custom
Mode for a network or USB connection and either manually select installation
packages and specify utilities or let the installation wizard discover your printer.
Express Mode Installation
Installing in Express Mode
Custom Mode Installation
Installing in Custom Mode with a Network Connection using Discover
page 1-4
Installing in Custom Mode with a USB Connection using Discover
6
Installing in Custom Mode with a Network Connection using Custom Select
on page 1-7
Installing in Custom Mode with a USB Connection using Custom Select
page 1-8
On the Installation Method page, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
Choose the component to upgrade. Click Next.
Confirm your upgrade settings. To start the upgrade, click Upgrade.
When the upgrade completes, click Next. The Installation Method page
appears.
Printing on both sides of a sheet of paper (duplex mode) reduces paper
consumption and helps conserve environmental resources. Duplex mode also
lowers costs by reducing the amount of paper that must be purchased. We
recommend that printing systems capable of duplex printing use duplex mode
by default. This can be set in the printer driver installation process for European
locations only.
After you click Express mode or Custom mode in the Installer, if the operating
system locale is EU and time zone is GMT 0, GMT +1 or GMT +2, a message
about resource and energy conservation appears. Read the message, and then
click OK.
After installation is successful, an Enable Duplex check box is displayed on the
Finished page. Select the check box to have the driver automatically default to
duplex mode. Exceptions to the default can afterward be made by selecting
options in the driver Quick Print or Basic tabs.
on page 1-3
on
on page 1-
on
User Guide