Reprinting A Quick Copy Job; Proof And Hold - Kyocera TASKalfa 181 User Manual

Job
3

Reprinting a Quick Copy Job

1
2
3
4
5
6
7
8

Proof and Hold

9-5
Click OK in all dialog boxes.
For example, use Quick copy when you print copies for a meeting later in the
day. If you learn at the last minute that additional copies are needed, you can
print them quickly using the printing system's operation panel without sending
the job again from your computer.
You can reprint a Quick copy job from the printing system's operation panel
without sending the job again from your computer.
At the printing system's operation panel, press the Print key.
Press the up or down key to select MENU, then press the OK key.
Press the up or down key to select e-MPS.
Press the up or down key to select Quick Copy, then press the OK key.
Press the up or down key to select the user name, then press the OK key.
Press the up and down key to select the job name, then press the OK key.
Use the numeric keypad to select the number of copies. You can select from 1
to 999 copies, or select Delete to delete the job.
Press the OK key.
Proof and hold is a Job storage (e-MPS) option that prints one copy of a print
job so that you can proof it before printing the remaining copies. This feature is
available when a hard disk is installed or a RAM disk is set up in the printing
system and selected in the Device Settings tab.
After the proof copy is printed and checked, remaining copies can be printed
from the printing system's operation panel without sending the job again from
the computer. If desired, you can change the number of copies printed.
Note: Proof and hold is not available for some applications such as Microsoft
Excel.
The number of Proof and hold or Quick copy jobs that can be stored is set at
the printing system's operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Proof and hold jobs are stored on the hard disk after printing but are deleted
when the printing system is turned off. You can manually delete a job at the
operation panel.
Warning: A print job can replace a job on the hard disk having the same User
name and Job name. To prevent this, select Use job name + date and time
under Overwrite job name.
User Guide