Epson Pro 7600 Unpacking And Setup Manual page 12

4. Remove the protective materials:
from the front cover (tape).
from the side of the print head
compartment (inside the front cover).
from the ink compartment cover (tape).
Note:
Do not re-install the screw. Store it separately to
avoid losing it.
Using the Optional Stand
Checking the contents of the package
Before assembling the Stand, check the contents of
the package to make sure that all of the items
shown below are included, and are not damaged.
Parts:
C
E
G
10
Tool:
Accessories:
D
F
H
C: Right base (1) and Left base (1)
D: Right leg (1) and Left leg (1)
E: Bottom horizontal strut (1)
F: Top horizontal strut (1)
G: Basket hooks (4)
H: Paper basket (1)
I
Hex wrench (1)
I:
J
L
N
J Base bolts (4)
K Strut bolts (2)
L + head screws with washers (4)
M Plugs (2)
N Wing screws (2)
O Washers (2)
K
M
O