Troubleshooting - Jenn-Air JFD2589KEP Use & Care Manual

T
ROUBLESHOOTING
Ice and Water
PROBLEM
Ice maker is not
producing ice
Temp Alarm Light
is flashing
All lights on
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
alarm sounded
Temperatures in
display look too low
POSSIBLE CAUSES
• Ice maker arm is on OFF position.
• Household water supply is not
reaching water valve.
• Copper tubing has kinks.
• Water pressure is too low.
• Check freezer temperature.
• Exceeded normal operating
temperatures.
• Control has been set to Sabbath
Mode.
• Alarm mode has been disabled.
• Temperature display has been set to
Celsius rather than Fahrenheit.
WHAT TO DO
• Confirm ice maker arm is down. See Automatic Ice
Maker, page 15.
• See Connecting the Water Supply pages 7-8.
• Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
• Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
• See Temperature Controls, pages 9-11. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
• See Temp Alarm, pages 10-11.
• See, Sabbath Mode, page 11.
• To activate audible alarms, refer to pages 10-11.
• See Temperature display on page 11.
30