Central Pneumatic CENTRALPNEUMATIC 98580 Owner's Manual & Safety Instructions page 10

Operating instructions
Read the EntiRE impORtant SaFEty inFORmatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
inspect tool before use, looking for damaged, loose, and missing parts.
if any problems are found, do not use tool until repaired.
tO pREVEnt SERiOuS injuRy:
Do not adjust or tamper with any control or component in a way not specifically explained within
this manual. improper adjustment can result in tool failure or other serious hazards.
Work piece and Work area Set up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the air hose along a safe route to reach
the work area without creating a tripping hazard
or exposing the air hose to possible damage.
The air hose must be long enough to reach
the work area with enough extra length to
allow free movement while working.
Page 10 For technical questions, please call 1-800-444-3353.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be hazardous objects
(such as utility lines or foreign objects) nearby
that will present a hazard while working.
Item 98580