HP StorageWorks MPX200 User Manual page 258

FcipRoute#%d: Remote Peer
172253
IP Address Validation Failed
FcipRoute#%d: Tcp Client's
172272
connect attempt failed
FcipRoute#%d: Tcp Server's
172273
Listen attempt failed
184515
FcipRoute#%d: TCP Link Up
184536
FcipRoute#%d: FCIP Link Up
FcipRoute#%d: VLAN Info Un-
184542
available
QL3xxx:eth%x PHY Downshift
204835
occurred
204837
QL3xxx:eth%x Link Down
217124
QL3xxx:eth%x Link Up
258 Log messages
A TCP client attempted to connect
to the router, but the IP address did
not match the address of the remote
FCIP Error router specified in the route defini-
tion. Check the route definition,
check for network rogues fishing for
open TCP ports.
Router was not able to open a TCP
connection with the remote router.
Check the route definitions on each
FCIP Error
router and check the Ethernet
cabling. Try to Ping the remote
router.
TCP connection was closed before
FCIP Error it was fully opened. Router will re-
start its listen socket.
TCP connection was successfully
FCIP Info
established with the remote router.
FCIP Info Local and Remote FC links are up.
Route definition includes VLAN, but
the network VLAN device instance
FCIP Info does not exist. This is an internal
error. Try removing and re-entering
the route definition.
The Ethernet device could not suc-
cessfully communicate with the link
peer at the highest negotiated port
TOE Error
rate. Check the Ethernet cabling and
Ethernet switch statistics of the cor-
responding port.
The Ethernet link is down. Check the
TOE Error Ethernet cabling and Ethernet switch
or remote peer statistics.
TOE Info The Ethernet link is up.