Lun Table - HP StorageWorks MPX200 User Manual

Description
qsrIsInitAddress
Syntax
Access
Description
qsrIsInitStatus
Syntax
Access
Description
qsrIsInitOsType
Syntax
Access
Description
qsrIsInitChapEnabled
Syntax
Access
Description

LUN table

These tables contain information about the LUN list.
qsrLunTable
Syntax
Access
Description
222 Simple Network Management Protocol setup
Type of iSCSI initiator's IP address (IPv4 or IPv6).
InetAddress
Read-only
IP address of the iSCSI initiator.
Integer:
1 = unknown,
2 = loggedIn,
3 = loggedOut,
4 = recovery
Read-only
Status of the iSCSI initiator, that is, whether or not it is logged in to the
router.
SnmpAdminString
Read-only
The type of the iSCSI initiator's operating system.
Integer: 0 = enabled; 2 = disabled
Read-only
A value indicating whether CHAP is enabled or not for this iSCSI initiat-
or.
SEQUENCE OF QsrLunEntry
Not accessible
A list of the LUNs on the FC targets discovered by the router. There are
as many entries in this table as there are FC targets on the router.