Presenting Luns To The Qlogic Iscsi Initiator; Installing The Hp Mpio Full Featured Dsm For Eva; Iscsi Hba Port Connections - HP StorageWorks MPX200 User Manual

Presenting LUNs to the QLogic iSCSI initiator

To present LUNs to the QLogic iSCSI initiator:
1. Follow the procedure in
• Create an iSCSI host.
• Present LUNs to the iSCSI host.
2. On the iSCSI HBA tab
LUNs in SMS under the HBA iSCSI port.
Figure 74 iSCSI HBA port connections
.
Use the Microsoft iSCSI initiator services to manage the iSCSI target login and LUN load-balancing
policies.

Installing the HP MPIO Full Featured DSM for EVA

Follow the procedure in the Installation and Reference Guide, available at
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492.
After installing the HP MPIO Full Featured DSM for EVA, open Computer Management to view and
control the iSCSI LUNs
102 MPX200 iSCSI configuration rules and guidelines
Step 2 on page 63 to:
(Figure 74), verify that the QLogic iSCSI HBA is connected to the iSCSI
(Figure 75).