Underline Mode; Proportional Mode - Epson LQ-800 User Manual

Underline mode

The LQ also has a mode that underlines characters and spaces. You
turn it on with ESCape "-1" and off with ESCape
the underline code is like the double-width code in that it uses a char-
acter, in this case the hyphen or minus sign, combined with numeral
one to turn it on and a character combined with the numeral zero to
turn it off. You can see it in action with the following program:
NEW
10 LPRINT "This is not
20 LPRINT CHR$(27)"-1";
30
LPRINT "This text is underlined."
This

Proportional mode

In the standard draft and Letter Quality modes on the LQ, each
character is given the same amount of space, whether it is a narrow
letter like or a wide letter like a capital W. In the proportional mode,
i
however, the space allowed for each letter is proportional to its size.
The proportional mode is always Letter Quality. You can see the
difference between standard and proportional modes if you enter and
run the following program:
10 LPRINT CHR$(27)"p1"
20 LPRINT "Proportional mode is on."
30 LPRINT CHR$(27)"p0";
40 LPRINT "Proportional mode is off."
Proportional mode is on.
Proportional
5-12
This is not
text
underlined."
underlined.
is underlined.
mode is
Note that
"-0".
off.