Integrated Peripherals - Gigabyte GA-EP43T-USB3 User Manual

2-6

Integrated Peripherals

SATA AHCI Mode
SATA Port0-3 Native Mode
Azalia Codec
Onboard H/W LAN
Green LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard USB 3.0 Controller
Onboard IDE Controller
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
USB Storage Function
higf : Move Enter: Select
F5: Previous Values
SATA AHCI Mode
Allows you to decide whether to configure the SATA controller integrated in the South Bridge to AHCI
mode.
IDE
AHCI
SATA Port0-3 Native Mode
Specifies the operating mode of the integrated SATA controllers.
Disabled
Enabled
Azalia Codec
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Onboard H/W LAN
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Green LAN
When the onboard LAN function and Green LAN are enabled, the system will dynamically detect if a
LAN cable is connected or not. If not, the corresponding LAN controller will be disabled automatically.
(Default: Disabled)
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Configures the SATA controller to IDE mode. (Default)
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Allows the SATA controllers to operate in Legacy IDE mode. In Legacy mode the
SATA controllers use dedicated IRQs that cannot be shared with other device. Set
this option to Disabled if you wish to install operating systems that do not support
Native mode. (Default)
Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode
if you wish to install operating systems that support Native mode.
[IDE]
[Disabled]
[Auto]
[Enabled]
[Disabled]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
F10: Save
- 48 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults