Init Display First - Gigabyte GA-EP43T-USB3 User Manual

Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The
adjustable range is from 0 to 15 seconds. (Default: 0)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Backup BIOS Image to HDD
Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image file. (Default: Enabled)

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card.
PCI Sets the PCI graphics card as the first display. (Default)
PEG Sets the PCI Express graphics card as the first display.
- 47 - BIOS Setup