Gigabyte GA-EG45M-DS2H User Manual page 7

Step 3: Create Your Smart TPM Key
1. Create a USB key:
Select the Use USB storage check box and click Refresh to search for the USB flash drive(s) that you
plug in. Then select the USB flash drive that you want to use as the portable Smart TPM user key. You can
select more than one USB flash drive at the same time. Selecting the Enable Backup to BIOS check box
will store the encrypted TPM User Password in the system BIOS.
If more than one user stores their encrypted TPM User Passwords in the BIOS, the latter will overwrite the
former.
2. Create a Bluetooth cell phone key:
Before creating a Bluetooth cell phone key, make sure your motherboard includes a Bluetooth receiver
and turn on the search and Bluetooth functions on your phone.
Upon completing the steps above, click OK to begin the initialization of the TPM chip and the setups of the
TPM User Password, your PSD, and the Smart TPM user key(s).
Select the Use Bluetooth Device check box and click Refresh
to search for the Bluetooth enabled cell phone(s). Then select
the cell phone that you want to use as the portable Smart TPM
user key and a screen similar to that on the left will appear. En-
ter a passkey (8~16 digits recommended) in Passkey which will
be used for pairing with your cell phone. Then enter the same
passkey on your cell phone for pairing.
- 7 -