Tpm Configuration Procedure; Configuring The System Bios - Gigabyte GA-EG45M-DS2H User Manual

TPM Configuration Procedure
To enable the TPM, follow the steps below in sequence:
1.

Configuring the system BIOS

2. Installing the Infineon TPM driver and the Smart TPM utility
3. Initializing the TPM chip
4. Configuring the Smart TPM utility
1. Configuring the System BIOS
To use the TPM functionality, first enter the system BIOS Setup to activate the TPM chip.
Step 1:
As the computer starts, enter the BIOS Setup program. Go to the Security Chip Configuration menu and
the following screen will appear. To activate the TPM chip, set Security Chip to Enabled/Activate. It's rec-
ommended that you use the Clear Security Chip setting (press <Ctrl> + <F1> in the BIOS main menu to
display this setting) to clear the TPM chip.
Previously encrypted files will become inaccessible after the TPM chip is cleared. Be sure to back up the
encrypted files first.
Security Chip
Clear Security Chip
Security Chip State
 : Move Enter: Select
F5: Previous Values
Step 2:
After completing the settings, press <F10> to save changes and then exit the BIOS Setup program.
To prevent the TPM settings being cleared by other users, we recommend that you set the User Password
in the BIOS Setup program.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Security Chip Configuration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled/Activate]
[Enter]
Enabled/Activated
F10: Save
- 3 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults