Gigabyte GA-EG45M-DS2H User Manual page 20

Step 2:
When the Add Bluetooth Device Wizard appears, enter a passkey (8~16 digits recommended) which will be
used for pairing with your cell phone.
Step 3:
Enter the same passkey on your cell phone for pairing. After confirming the passkey, click Finish to complete
creating the Bluetooth cell phone key. You are able to access/close your PSD when turning on/off Bluetooth
on your cell phone or when your cell phone gets close to or away from the computer.
To cancel a Bluetooth cell phone key:
To cancel a Bluetooth cell phone key, uncheck the Bluetooth cell phone that has been configured as the
Smart TPM key on the Configure BT Devices tab. When prompted to confirm, click Yes. Then the Bluetooth
cell phone key is cancelled.
- 20 -