Setting System Lockout; Setting The System Hold Time - Uniden UBC3500XLT Owner's Manual

Scanning receiver

Hide thumbs Also See for UBC3500XLT:

Table of Contents

Hints:

• Access single-digit system Quick Keys by

pressing the single digit on the keypad during

scanning. Access two-digit system Quick Keys by

pressing

then both digits.

• You can assign as many systems to the same

quick key as you want.

• To be scanned, a system's quick key must be

activated and the system must be unlocked.

Setting System Lockout

Program System

Select the system

Edit Sys Option

Set Lockout

This setting controls whether the system is scanned

when its quick key is enabled. Rotate the scroll control

to select your setting, then press E.

Lockout - the system is not scanned

Unlocked - the system is scanned

Note: You can also lock or unlock a system by holding

and rotating the scroll control to select the

Func

system, then pressing

Program System

Select the system

Edit Sys Option

Set Hold Time

This setting controls how many seconds the scanner

scans a system before moving to the next unlocked

system. Enter a value from 0-255, then press E to

save the setting.

Programming/Editing Optional Settings

+ L/O.

Func

Table of Contents