Editing The System Quick Key; Setting System Lockout - Uniden BCD396T Owner's Manual

• Press
• Press

Editing the System Quick Key

Program System
Menu
Select the system
Edit Sys Option
Set Quick Key
After selecting this option, select any number from
0-99 to assign the system to a quick key or press No
to assign the system to no quick key, then press E.
Hints:
• Access single-digit system Quick Keys by
pressing the single digit on the keypad during
scanning. Access two-digit system Quick Keys by
pressing
• You can assign as many systems to the same
quick key as you want.
• Preprogrammed systems are set to quick key 9.
• To be scanned, a system's quick key must be
activated and the system must be unlocked.

Setting System Lockout

Program System
Menu
Select the system
Edit Sys Option
Set Lockout
This setting controls whether the system is scanned
when its quick key is enabled. Rotate the scroll control
to select your setting, then press E.
Locked - the system is not scanned
Unlocked - the system is scanned
Programming/Editing Optional Settings
twice to delete the current character.
three times to clear the entire alpha tag.
then both digits.
73