Using The Menu - Uniden UBC3500XLT Owner's Manual

Using the Menu

Using the Menu
The scanner's menu lets you select options that let
you set up and use the scanner.
To use the menu, press
scanner. To select a menu item, rotate the scroll
control clockwise or counterclockwise. The currently-
selected menu item is highlighted with a bar on the
display. When the menu item you want to select is
highlighted, briefly press the scroll control to select it.
To back up a level, press
mode, press again or the L/O key.
Menu
This table shows the scanner's menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options
on any screen, rotate the scroll control.
Menu Item Submenu
Select System
-- M E N U --
New System
Program System
Srch/CloCall Opt
Search for ...
Srch/CloCall Opt
-- M E N U --
Freq Lockouts
Program System
Broadcast Screen
Srch/CloCall Opt
CTCSS/DCS Search
Srch/CloCall Opt
Search for ...
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
Air Band Step
Search for ...
-- M E N U --
Service Search
Program System
Edit Service
Srch/CloCall Opt
Custom Search
Srch/CloCall Opt
Search for ...
Edit Custom
Search and Store
36
on the left side of the
Menu
. To exit the menu
Menu
(32)
(70)
(71)
(16)
(72)
(74)
(55) (72)
(73)
(73)
(74)
(75)
(59)
(62)
(60)
(61)
(63)