Table of Contents
Advertisement
SETTING THE RING TIME
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after six, nine
or twelve rings. Setting
new messages, and after nine rings if there are none. This way, if you make a long distance call
to check your messages, you can hang up after the seventh ring to avoid billing charges.
1. Press
three times. You hear '
menu
[
] 12, [ ] Toll Saver), and it is displayed on the base.
12
2. Press
or
3. Press
/ringer to select the new ring time, a confirmation tone sounds, then the
set
announcement '
Ring Time
4. Press
to exit menu options.
When using the
SETTING THE MESSAGE RECORD TIME
Announce Only
feature, you may
You have three record time options. The options '
want to change
duration for recording incoming messages. '
your outgoing
message, if the
preset greeting or your personal greeting but prevents the caller from leaving a message.
message prompts
the caller to leave
1. Press
four times. '
menu
a message. The
([ ] 1 minute, [ ] 4 minutes, [ ] Announce Only and it is displayed on the base.
1
4
prerecorded
2. Press
or
message changes
3. Press
to select the new recording time, a confirmation tone sounds, then the
automatically.
set
announcement '
Record Time
4. Press
to exit menu options.
(Toll Saver), the answering system picks up after six rings if you have
' and the current ring time ([ ] 6, [ ] 9,
Ring Time
until the desired ring time appears.
' and the new ring time is announced.
' or '
1 minute
4 minutes
' answers the call with the
Announce Only
' is announced and the current recording time
Record Time
A
until the desired time appears.
' and the new recording time is announced.
Page 21
volume
set/
ringer
menu
status
delete
play/stop
6
9
repeat/rew
skip/ff
find hs
memo
greeting
answer
on/off
' set the
volume
set/
ringer
menu
status
delete
play/stop
repeat/rew
skip/ff
find hs
memo
greeting
answer
on/off
Advertisement
Table of Contents
