Remote Access Away From Home - Uniden XSA965 Quick Start Manual

REMOTE ACCESS AWAY FROM HOME

You can operate your answering system from a remote location using any touch-tone telephone. Use this
You must enter a
function to check for recorded messages, to play or delete messages, even to record a new greeting
command within
message.
15 seconds of
entering command
1. Call your telephone number.
waiting mode or
2. During the greeting message, press
the answering
(See "Setting a Personal Security Code", page 20)
system
3. The answering system announces the current time and the number of messages stored in memory.
automatically
Then you hear "To play incoming messages, press
hangs up and
returns to standby. 4. You may continue to listen to the Help Guidance, or you may select a command from the following
chart:
Command Function
then 1 Repeat a Message
then 2 Playing Incoming Messages
then 3 Skipping a Message
then 4 Deleting a Message
then 5 Stop Operation
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding
command, it starts the Recording function. If you want to stop the recording, enter the command again.
5. After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time from the
chart.
6. When you are finished, hang up to exit the system. The answering system automatically returns to
standby.
and enter your PIN code (Factory Setting: 80).
. For help, press
2 0
Command Function
then 6 Answering System On
then 7 Memo Record/Stop*
then 8 Greeting Message Record/Stop*
then 9 Answer System Off
then 0 Help Guidance
Page 28
".