Battery; Technology - Olympus TG-620 Instruction Manual

Caution for Usage Environment
• To protect tile high-precision technology contained in this
product, never leave the camera in the places listed below, no
matter if in use or storage:
• Ptaces where temperatures and/or humidity are high or go
through extreme changes Direct sunlight, beaches, locked cars,
or near other heat sources (stove. radiator, etc.) or humidifiers
• in sandy or dusty environments
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain When using
products with weatherproof designs, read their manuals as well
• in places prone to strong vibrations
• Never drop the camera or subject it to severe shocks or vibrations
• When attaching the camera to or removing it from a tripod,
rotate the tripod screw, not the camera.
• Before transporting the camera, remove a tripod and all other
non-OLYMPUS accessories.
• Do not touch electric contacts on cameras
• Do not leave the camera pointed directly at the sun This may
cause lens or shutter curtain damage, color failure, ghosting on
the image pickup device, or may possibly cause fires
• Do not push or pull severely on the lens
• Before storing the camera for a long period, remove the
batteries Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
• The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic field, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit. TV/radio tower, or
transmission towers in such cases, turn the camera off and on
again before further operation.
• Always observe the operating environment restrictions
described in the camera's manual
Battery
• This camera uses a lithium ion battery specified by Olympus
Do not use any other type of battery
• If the battery's terminals get wet or greasy, camera contact failure
may result. Wipe the battery well with a dry cloth before use
• Always charge a battery when using it for the first time, or if it
has not been used for a long period
• When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
• The number of pictures you can take may vary depending on
the shooting conditions or battery.
• Before going on a long trip, and especially before traveling
abroad, purchase extra batteries A recommended battery may
be difficult to obtain while traveling.
• When storing the battery for a long period, select a cool
location for storage.
• Please recycle batteries to help save our planet's resources
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations
Monitor
• Do not push the monitor forcibly; othe_vise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but
this is not a malfunction
• When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction: it will be less noticeable in playback mode.
• In places subject to low temperatures, the monitor may take a
long time to turn on or its color may change temporarily When
using the camera in extremely cold p]aces, it is a good idea to
occasionally place it in a warm place The monitor exhibiting
poor performance due to low temperatures will recover in
normal temperatures.
• The monitor of this product is manufactured with high-quality
accuracy, however, there may be a stuck or dead pixel on the
monitor. These pixels do not have any influence on the image
to be saved Because of the characteristics, the unevenness
of the color or brightness may also be found depending on the
angle, but this is due to the structure of the monitor This is not
a ma]function
EN