Creating Panoramic Images; Taking Pictures - Olympus TG-620 Instruction Manual

Magic Filter
o
OPin Hole *_
O Fish Eye
O Drawing _2
O Soft Focus'_
OPunk
Sparkle "_
O Watercoio¢
O Reflection
_) Miniature
• Fragmented
ODrametic
The [Image Size] (p. 33) of the retouched image is
limited to Ira] or lower.
,2 Two images ere saved, an unmodified image end an
image to which the effect has been applied.
_'i In MA61¢ mode, the optimum shooting settings are pre-
programmed for each scene effect. For this reason,
some settings cannot be changed in some modes
(_F_ The selected effect is applied to the movie. The effect
may not be applied depending on the shooting mode.
Creating pan_ramic images (J_ mqde)
Set the shooting mode to _1.
3 Use <][> to select the desired mode and then
press the <°3 button to set.
Three frames are taken and combined
by the camera. The user only composes
the shots so that the target marks
and pointers overlap, end the camera
automatically releases the shutter.
Three frames are taken and combined
Manual by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.
The frames that were taken ere
PC combined into a panorama image using
the PC software.
_ For details on installing the PC software, see
"Installing the PC software and registering user"
(p. 14).
_} When set to [Auto] or [Manual], [Image Size]
(p. 33) is fixed to 2MB or equivalent.
_ The focus, exposure, zoom position (p. 19), end white
balance (p. 31) ere locked at the first frame.
_,_ The flash (p. 20) is fixed to (_) (Flash Off) mode.
Taking pictures with [Auto]
_1" Press the shutter button to take the first frame.
<_) Move the camera slightly in the direction of the second
frame.
Press V to go to the submenu.
Screen when combining images
from left to right
EN