Olympus TG-620 Instruction Manual page 121

Reducing the blur caused by the
camera shake when shooting
[Image Stabilizer] (still images)/
[IS Movie Mode] (movies)
a (Camera Menu 1)
I_lmage Stabilizer (still images)/
Menu)_ S Mode (m£ffeS) .....
The image stabilizer is deactivated.
This is recommended for shooting
Off when the camera is fixed in place on
a tripod or other stable surface.
On The mage stab zer s actvated.
_ Default setting
[image Stabilizer] [On], [IS Movie Mode] [Off]
_ There may be a noise coming from inside the camera
when the shutter button is pressed with [Image
Stabilizer] (still images) set to [On].
_ Images may not be stabilized if camera shake is too
severe.
_ When the shutter speed is extremely slow, such as
when taking pictures at night, [Image Stabilizer] (still
images) may not be as effective.
Viewing the image immediately after
shooting [Rec View]
........ a
off
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
Automatically rotating images shot with
the camera in a vertical position during
playback [Pic Orientation]
(TG-820 only)
........ 2)_ Bic O_!entatiQn
_ During shooting, the [_q] (p. 43) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
EN