Sewngs; Appendi; Cleaning And Care - ProScan 40LC45S57 User Manual

Table of Contents

Advertisement

Basic operation
o
2nput
Block o You can block the input source with this function° For example, if you want to biock AV
input, just highlight [AV] and press [ENTER].
The AV input will not be seen in the screen.
o Change
Password
o The first time you use this function, use the default password. If you want to
change it, first enter the new password then enter the same password again°
o
Clean A[[ o This function wi[[ let you clean aH the channels stored on this _o
Note:
If you choose this function, a[[ the programs you preset wi[[ be lost.
W settings
1. Press MENU to open the OSD option
2. Press A or V to highlight TV, then press _ to enter the TV menu.
3, Press A or V to highlight an option, then press _ or _ to adjust the option, You can
o Tuner Mode o Select the Td signal source. You can select Antenna
or Cable.
o Channe_ Scan o Scans for channels that have signals and stores the channels information
in memory°
When you press < or _, your _
skips any channels that do not have a signal,
o Channe_ Skip o Deletes a channel stored in memo_.
When you press CH+ or CH o, your TV skips the
channel you deleted, "fou can still tune to the channel using the number bu_ons on the remote control,
o MT$ o Selects the sound mode. You can select Hono, Stereo, or SAP (second audio program).
o Audio LanguageoSetects
the audio language for a program,
Cleaning
and care
WARNING_
Do not t_ to remove the cabinet from the back. Refer servicing to qualified service technicians.
To clean the W screen:
1. Unplug the _
to avoid possible shock hazard.
2. Use a dean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to dean the _
screen and trim. Do not use too much water as water spilled into the cabinet
can cause
damage to the _.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a qua[iW furniture polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinne_ benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents