Using The Remote Contro; Preparing The Remote Control For Use - ProScan 40LC45S57 User Manual

Using the remete control
Preparing the remete control for use
Installing the remete centre[ batteries
1. Open the battery cover on the back of the remote control,
2. Install twoAAAsize(J.,5V) batteries, Matchthe+ and ,osigns on the batteries to the signs on the
battery compartment_
3, Close the battery cover,
Note:
l°Dispose of your batteries in a designated disposal area, Do not throw batteries into fire,
2,Do not mix battery types or combine used batteries with new ones,
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery
4,If you do not use the remote control for a long time, remove the batteries.
5.The effective range of the remote control is demonstrated by the following figure:
6m
8rn
15°
6m 6m
8m
12