Graco TexSpray 1030 FC Repair Manual page 18
For portable spray application of architectural paints and coatings 0.9 to 3.0 gpm (3.4 to 11.4 lpm) flow rate 750 psi (5.1 mpa, 51 bar) maximum working & 500 psi (3.4 mpa, 34 bar) recommended maximum working pressure
Hide thumbs
Also See for TexSpray 1030 FC:
- Operation manual (20 pages) ,
- Repair manual (28 pages) ,
- Troubleshooting manual (24 pages)
Table of Contents
Advertisement
Removal
1. Fig. 16. Remove four capscrews (42) and lock-
washers (29) which hold clutch housing (88) to
engine.
2. Remove screw (101) from under mounting
plate (D).
3. Remove engine key (90).
4. Pull off clutch housing (88).
Installation
1. Fig. 16. Push on clutch housing (88).
2. Install four capscrews (42) and lockwashers (29)
and secure clutch housing (88) to engine. Torque
to 200 in-lb (22.6 NSm).
3. Install capscrew (101) from beneath mounting
plate (D). Torque to 26 ft-lb (35.2 NSm).
18
309662
Clutch Housing
Fig. 16
90
88
29
42
D
101
8708A
Advertisement
Table of Contents
