Appendix; Stitch Settings; Utility Stitches - Brother Simplicity SB700T Operation Manual

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4

APPENDIX

STITCH SETTINGS

Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches in
the following table.
CAUTION
● Select a stitch width of 5.0 mm (3/16 inch) or less, otherwise the needle may break or the machine may
be damaged.
● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the
machine may be damaged.

Utility stitches

Pattern No.
Stitch Name
Left J 00
Center J 01
Triple
J 02
stretch stitch
Stretch stitch J 03
Zigzag stitch J 04
3-point zig-
J 05
zag stitch
G 06
Overcasting
G 07
stitch
J 08
*Rev.: Reverse **Rfc.: Reinforcement
****Select a stitch width of 5.0 mm (3/16 inch) or less.
56
Application
Basic stitching, sewing
00 00 00
gathers or pintucks, etc.
Attaching zippers, basic
01 01 01 stitching, and sewing
gathers or pintucks, etc.
Attaching sleeves, sew-
ing inseams, sewing
02 02 02
stretch fabrics and deco-
rative stitching
Sewing stretch fabrics
03 03 03
and decorative stitching
Overcasting and attach-
04 04 04
ing appliqués
Overcasting on medium
weight or stretch fabrics,
05 05 05
attaching elastic, darn-
ing, etc.
Overcasting on thin or
06 06 06
medium weight fabrics
Overcasting on thick fab-
07 07 07
rics
Overcasting on stretch
08 08 08
fabrics
***Do not use reverse stitching.
Stitch Width Stitch Length
[mm (inch.)] [mm (inch.)]
Auto Manual Auto Manual
0.0 0.0–7.0 2.5 0.2–5.0
(0) (0–1/4) (3/32) (1/64–3/16)
2.5 0.2–5.0
– –
(3/32) (1/64–3/16)
0.0 0.0–7.0 2.5 1.5–4.0
(0) (0–1/4) (3/32) (1/16–3/16)
1.0 1.0–3.0 2.5 1.0–4.0
(1/16) (1/16–1/8) (3/32) (1/16–3/16)
3.5 0.0–7.0 1.4 0.0–4.0
(1/8) (0–1/4) (1/16) (0–3/16)
5.0 1.5–7.0 1.0 0.2–4.0
(3/16) (1/16–1/4) (1/16) (1/64–3/16)
3.5 2.5–5.0 2.0 1.0–4.0
(1/8) (3/32–3/16) (1/16) (1/16–3/16)
5.0 2.5–5.0 2.5 1.0–4.0
(3/16) (3/32–3/16) (3/32) (1/16–3/16)
5.0 0.0–7.0 2.5 0.5–4.0
(3/16) (0–1/4) (3/32) (1/32–3/16)
***
*
No Yes Rev.
Yes
*** *
Yes Rev.
( J )
**
No No Rfc.
****
**
Yes
No Rfc.
( J )
****
***
*
Yes
Yes Rev.
( J )
****
**
Yes
No Rfc.
( J )
**
No No Rfc.
**
No No Rfc.
****
**
Yes
No Rfc.
( J )