Table of Contents
Advertisement
UsingTimer-Activated Functions
Remote Commander
D_Y(_
ENTER
JUMP
AN WINDOW
CH
VOL
MENU
VTR1-2-3
MDP
TV CABLE BOX
Press A/V WINDOW +/- to select "30" (minutes);
then press RETURN.
Each timeyoupressAN WINDOW +/--, the minutes change
in sequence.
I
1. EYERYHON_FR[
:,_
2._._
10
Press A/V WINDOW +/- to select =3" (hour
duration); then press RETURN.
Each timeyoupressAN WINDOW +/--,the duration
changesfrom"1" - "6"in sequence.
_N/OFF
TillER
1. EVERY HON_-FRI
:t:_AH
3H CH
2..'_
_._: -,
_:_:_ _AI4 .H CH__
Set. t.he channel.
11
Press/VV WINDOW +/- to select "8" (channel);
then press RETURN.
The TIMER lamplights,indicating thatthe se_ng is
complete.
Each time youpressAN WINDOW +/-, the channel
numberchangesfrom 1- 125in sequence.
The display"TIMER WILLBE OFF" appearson the screenone
minutebefore the timerdurationends.
To set program 2 or 3.
Press RETURN and repeat steps 6 - 11.
To erase an ON/OFF TIMER setting
Display the ON/OFF TIMER screen, select the setting you
want to erase, and select a blank space for the day.
The ON/OFF TIMER setting is erased.
To enter a new ON/OFF TIMER setting
Display the ON/OFF TIMER screen and repeat steps 6 - 11.
To return to the previous menu
Press A/V WINDOW +/- until the cursor points to
" _
MENU."
Then press RETURN.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen.
Press MENU.
Note
If you unplug the projection TV or a power failure occurs, both the
clock and timer settings will be erased.
Reset the current time; then
set the timer.
58
I Chapter 3: Using Advanced Features
Advertisement
Table of Contents
