Table of Contents
Advertisement
Customizing the ScreenDisplay
Remote Commander
4
Press AN WINDOW +/- to select a blank space.
10
11
12
JUMP
AN WINDOW
CH
VOL
="=HH
PICTURE
mLW
VTR1-2-3
MDP
TV CABLEBOX
mr_n
m
Press AN WINDOW +/- to select "B."
15
Press RETURN.
The thirdcaptionspace turnsred.
Press AN WINDOW +/- to select "C."
15
Press RETURN.
The setting is complete.
When you select or display the channel number, the
channel caption also appears.
To caption more channels
Repeat steps 6 - 15,
To erase unnecessary captions
Display the CH CAPTION screen, select the channel with
the caption you want to erase, and select blank spaces for
the channel caption; then press RETURN.
The caption forthatchannelis erased.
To return to the previous menu
Press AN WINDOW +/- until the cursor points to
" _
MENU."
Then press RETURN.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
Press MENU.
Note
You can set up to 32 channel captions. If the memory is full,
"The memory is full, sorry" appears on the screen. Erase any
unnecessary captions, and begin again.
13 Pre RETU""
Thefourthcapff_ space turnsred.
52 1
Chapter 3: Using Advanced Features
Advertisement
Table of Contents
