Table of Contents
Advertisement
Adjusting the ProjectionTV
Follow these instructions to set S-VIDEO on or off,
depending on the kind of video equipment you have
connected to the projection TV. For instructions on
connecting video equipment, see pp. 15 - 18.
Note
If the projection TV is in TV, VIDEO 2 or VIDEO 3 mode, the
=S-VIDEO" display is shaded and cannot be selected.
Press TV/VIDEO on the projection TV or on the Remote
Commander to change to VIDEO 1 mode.
Remote Commander
D_Y(_
ENTER
JUMP
AN WINDOW
CH
VOL
MENU
VTR1-2-3
MDP
W CABLEBO:,
m
Press MENU.
Themainmenuappears.
Press RETURN.
The modedisplaytums red.
PressAN WINDOW +/- to select"ON"or "OFF."
Press RETURN.
Thesettingiscomplete.
To return to the previous menu
Press AN WINDOW +/- until the cursor points to
= ;) MENU."
Then press RETURN.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
PressMENU.
Press AN WINDOW +/- until the cursor points to
"MODE SET."
Press RETURN.
The mode set menu appears, with the cursor pointing to "S-
VIDEO."-
46 1
Chapter3:
Using Advanced Features
Advertisement
Table of Contents
