Sony Handycam HDR-GW77V Operating Manual page 41

Preparing a computer
(Windows)
ii ¸ i_!_!_!_i_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_ ....................................................
Microsoft Windows XP SP3_2/Windows Vista
SPZ×3/Windows 7 SP1
13 .......................
Intel Core Duo 1.66 GHz or f:aster, or Intel
Core 2 Duo 1.66 GHz or f:aster (Intel Core
2 Duo 2.26 GHz or faster is required when
processing FX or FH movies, and Intel Core
2 Duo 2.40 GHz or faster is required when
processing PS movies.)
However, Intel Pentinm III 1 GHz or faster is
sufficient for the fnllowing operations:
-Importing the movies and photos to the
computer
-Creating a Blu-ray disc/AVCHD recording
disc/DVD-video (Intel Core Duo 1.66 GHz
or f:aster is required when creating a DVD
video by converting high definition image
quality (HD) to standard definition image
quality (STD).)
- Processing only the movies with standard
definition image quality (STD)
Windows XP: 512 MB or more (1 GB or
more is recommended)
Windows Vista/Windows 7:1 GB or more
Disk volume required fnr installation:
Approximately 500 MB (10 GB or more
may be necessary when creating AVCHD
recording discs. 50 GB maximum may be
necessary when creating Blu-ray discs.)
Mininmm 1,024 × 768 dots
USB port (this must be provided as standard,
Hi-Speed USB (USB 2.0 compatible)), Blu-ra
disc/DVD burner
Either NTFS or exFAT file system is
recommended as the hard disk file system.
×_Standard installation is required. Operation is
not assured if the OS has been upgraded or in a
nmlti boot environment.
×_64-bit editions and Starter (Edition) are not
supported. Windows huage Mastering API
(IMAPI) _\'r.2.0 or newer is required to use disc
creation function, etc.
.×3 S tarter (Edition) is not supported.
.×4 F aster processor is recommended.
• Operation with all computer environments is
not assured.
1 Turn on the computer.
2
• Log on as an Administrator _k_r
installation.
• Close all applications running on the
computer befbre installing the so_ware.
Connect the camcorder to the
computer using the USB cable,
then select [USB Connect] on the
LCD screen of the camcorder.